#DIAMOND DRIVER FOR MAC HOW TO#
#DIAMOND DRIVER FOR MAC DRIVERS#

Increasing the loft also results in achieving higher ball spins and ball launches. Hence, those who want to hit a draw often and as much as possible prefer opting for the +2В°setting. Players have noticed that opting for the +1В° setting promotes a lesser draw than the +2В°setting. Take the wrench off from the screw and hit a draw with your driver.You will hear a double-click sound that indicates the head is seated firmly in place. Put the wrench into the screw once more and do the same number of turns to the right or the clockwise direction.

Reseat the clubhead above the shaft taking care to ensure that the small white dash below the stated loft on the clubhead is in line with the above lie angle setting.Turn the upper cog and set the D mark in line with the chosen loft setting.Turn the lower cog and set the +1 or +2 marking on it in line with the white small dash on the hosel.Lift the clubhead upwards gently and remove it from its position on the shaft.Rotate the screw to the left or in anticlockwise directions until you notice the screw is quite loose.Put the Callaway wrench accompanying the Callaway Epic Max driver into the screw behind the clubhead.The steps given below walk you through the process of setting the driver for a draw. The second step requires opting for the D setting on the upper cog. The first step entails raising the default loft using the lower cog. There are two steps involved in setting the Callaway Epic Max driver for a draw. Stop the turning process and remove the wrench from the screw.Insert the wrench into the screw once again and turn it the same number of times you did in Step 2 in the clockwise direction or to the right until you hear a double-click sound.

Replace the clubhead over the shaft such that the small white dash on the clubhead is aligned with the markings mentioned above.Ensure that the small white dash, the loft marking and the lie angle marking are in line with each other.Rotate the upper cog and align the N or D lie angle marking with the loft setting chosen in the above step.Rotate the lower cog and align the preferred loft marking with the small white-colored dash marking on the hosel.Raise the clubhead from its position and take it off from the shaft of the Epic Max driver.Turn the wrench a few times in the anticlockwise direction or to the left until the screw becomes loose.This screw is present on the rear of the clubhead. Insert the wrench into the screw of the clubhead of the driver.

#DIAMOND DRIVER FOR MAC HOW TO#

The following steps guide you on how to go about doing the desired OptiFit or hosel setting on your driver using the Callaway wrench that comes with it. These cogs are independent of each other and help in setting the preferred loft and lie angle adjustments. The Callaway Epic Max driver is equipped with an OptiFit hosel that has two rotatable cogs, one on top of the other.

#DIAMOND DRIVER FOR MAC DRIVERS#

The various adjustment settings that can be done for the loft and lie angles of the Callaway Epic Max driver, the Callaway Epic Speed and the Callaway Epic Max LS drivers are given in the table below.Д¬allaway Epic Max driver OptiFit settings The Callaway Epic Max LS driver is the best choice among the three drivers for playing a fade.Д¬allaway Epic Max driver adjustment chart Similarly, lowering their standard lofts produces less spin and lower launches.

Golfers have noticed that they can achieve more spin and higher launches when they increase the standard loft of all three Callaway Epic drivers. On the other hand, the Callaway Epic Speed driver has no weight associated with it. The Callaway Epic Max LS features a slightly lesser adjustable weight of 12g. On the weight front, the Callaway Epic Max driver features an adjustable 16g perimeter weight on its rear. Each of the three drivers can be set for any loft and lie combination. The lie settings are the Neutral setting and Draw setting indicated by N and D respectively on the upper cog. To increase or decrease the standard loft settings by 1В°, you can use the lower cog. All three variants come with OptiFit hosels that encompass two cogs that offer eight loft and lie combinations.ДЄpart from the standard loft setting, the other loft settings supported are the -1, +1 and +2 loft settings. The Callaway Epic Max driver set features three drivers encompassing the Callaway Epic Max, the Callaway Epic Speed and the Callaway Epic Max LS. To adjust your Callaway Epic Max driver, use the lower cog on the hosel to increase or decrease the standard loft by 1-2 degrees. How do I adjust my Callaway Epic Max driver? How to adjust Callaway Epic Speed driver.Callaway Epic Max driver OptiFit settings.Callaway Epic Max driver adjustment chart.How do I adjust my Callaway Epic Max driver?.

Diamond driver for mac